AR100 ARMA – ID

$0.00

LABELS
Thermal Transfer Printable label stocks
in (3) formats:

PSA – Durable, (TT) printable matte white polyester face stock with UV cross-linked ultra high performance acrylic adhesive for permanent bond to many substrates. The face stock is coated to provide clean crisp print edge definition generating a high print contrast signal (PCS) when printed with our ARMA-Ribbon.

TPU – Permanent “Mold-In ” black TPU label stock.
The printable TPU label is provided on a low tack carrier and bonds to fabrics, textiles, PU coated materials and other TPU films with heat & pressure. This label prints with relatively lower print head temps and higher speeds as you are depositing a smaller % of white ink on a black label – vs – large qty of black ink on a white label to achieve a black label with white print.

TPA – Semi-Gloss white polyester face stock coated with a heat activated adhesive (thermal Plastic Adhesive) for permanent bond to many substrates. Label stock is cast onto a clear polyester liner and provided kisscut in roll form.

* Please see our line of ARMA-Ribbons to match appropriate ribbon to label format.

Clear
SKU: N/A Category:

Description

Durable, printable face stock with NEW cross-link ultra high performance PSA (Pressure Sensitive Adhesive) acrylic for permanent bond to various high and low energy substrates.

 

Printable PSA Label

 

FEATURES

  • Printable white polyester label stock
  • Print methods: (TT) Thermal Transfer, Flexo, Screen Print
  • Polyester film liner

BENEFITS

  • Superior plasticizer and chemical resistance
  • Will bond to materials not normally suited for pressure-sensitive adhesives

PRODUCT APPLICATIONS

Suggested for bonding to foams, corks, felts, textiles, nylon and most metals and plastics; particularly plasticized PVC. Users should assure the product meets the specific needs of their application(s).
can tailor the product to meet your specific needs. We can provide various label sizes, core sizes and quatity per roll.

PRODUCT CONSTRUCTION – TYPICAL VALUES

White Polyester:2.0 mils
Adhesive:2.3 mils
Liner (polyester):2.0 mils
White (paper):3.3 mils

NOMINAL TESTED VALUES

180° peel to stainless steel – 115.2 oz/in or 7.20 lbs/in
Quick Tack to stainless steel at 72° F – 78.9 oz/in or 4.93 lbs/in
Reference Test Methods:
180° peel – PSTC 101A, ASTM D 3330

RECOMMENDED ROBBON

We recommend our AR-201 and AR202 Ribbon

STORAGE AND SHELF LIFE

Two years when stored and 75°F, and under 50% R.H. from date of manufacture.

SERVICE TEMPERATURE RANGES

ID labels should be applied between 45°F and 120°F
ID has a service range of -50°F to +250°F

A degree of experimentation may be required to determinet he best process for a particular application.

Important Notice: All statements, technical information and recommendations related to the Seller’s products are based on information believed to be reliable, but accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risk and liability whatsoever in connection with such use. Arma Products™ makes no warranties, expressed or implied, of merchantability or fitness for a particular purpose.

03-2015-A

528 W. 21st Street #2 • Tempe, AZ 85282 • Phone: 480-968-6631 • Fax: 480-966-1885

armaproducts.net

Download PDF

We offer a permancent “mold in ID®” black TPU label stock with the most durable, cost effective solution in the market. The Printable Black TPU Label is provided on a low tack carrier film and Bonds to fabrics, textiles, PU coated materials and other TPU films with heat & pressure

 

Printable TPU Label

 

FEATURES

  • Single layer “mold in ID®” black TPU label stock that integrates into a wide range of substrates
  • Excellent resistance to fuels (Gas, Diesel, Aviation) and handles continuous exposure to water and high humidity
  • UV resistant

BENEFITS

  • Permanent attachment for “track and trace” of pertinent information such as size, D.O.M., lot numbers and sample numbers
  • High Moisture Vapor Transmission Rate (MVTR) mitigates delamination and relabeling issues
  • Low Cost and Improved profitability

PRODUCT APPLICATIONS

Suggested for bonding to fabrics, textiles, nylon, PU coated materials and users should assure the product meets the specific needs of their application(s).
can tailor the product to meet your specific needs. We can provide various label sizes, core sizes and quatity per roll.

Not recommended for siliconized or fluorocarbon base coatings.

PRODUCT CONSTRUCTION – TYPICAL VALUES

Black TPU:4.0 mils
Liner with low tack PSA:2.5 mils
Core is 3″ ID plastic:

NOMINAL TESTED VALUES

180° peel to stainless steel – 115.2 oz/in or 7.20 lbs/in
Quick Tack to stainless steel at 72°F – 78.9 oz/in or 4.93 lbs/in
Reference Test Methods:
180° peel – PSTC 101A, ASTM D 3330

RECOMMENDED ROBBON

We recommend our white AR203 Ribbon

STORAGE AND SHELF LIFE

Two years when stored at 72°F, 50% R.H. from ARMA Product’s date of manufacture.

TEMPERATURE RANGES

ID labels should be applied at >250°F (121°C) for 6 – 12 seconds.

ID has a service range of -40°F to +302°F (-40°C to +150°C)

A degree of experimentation may be required to determinet he best process for a particular application.

Important Notice: All statements, technical information and recommendations related to the Seller’s products are based on information believed to be reliable, but accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risk and liability whatsoever in connection with such use. Arma Products™ makes no warranties, expressed or implied, of merchantability or fitness for a particular purpose.

01-2015-A

528 W. 21st Street #2 • Tempe, AZ 85282 • Phone: 480-968-6631 • Fax: 480-966-1885

armaproducts.net

Download PDF

Durable Thermal Transfer Printable Label with Heat Activated Adhesive for Permanent Bond to Various Substrates

 

Printable Heat Activated Label

FEATURES

  • Printable white polyester label stock
  • Heat activated adhesive
  • Polyester film liner

BENEFITS

  • Superior plasticizer and chemical resistances
  • Will bond to materials not normally suited for pressure-sensitive adhesives

PRODUCT APPLICATIONS

Suggested for bonding to foams, corks, felts, textiles, nylon and most metals and plastics; particularly plasticized PVC. Users should assure the product meets the specific needs of their application(s).
ARMA Products can tailor the product to meet your specific needs. We can provide various label sizes, core sizes and quatity per roll.

Not recommended for siliconized or fluorocarbon base coatings.

PRODUCT CONSTRUCTION – TYPICAL VALUES

White Polyester:2.0 mils
Adhesive:5.0 mils
Liner:2.0

NOMINAL TESTED VALUES

  1. 180° peel to stainless steel – 35 oz/in or 2.2 lbs/in – Failure mode was “No Transfer”
  2. T-peels to cotton – 59oz/in or 3.7 lbs/in – Failure mode was “PET tore”
  3. T-peel to a dark green nylon – 230 oz/in or 14.4 lbs/in – Failure mode was “PET tore”
  4. T-peel to a khaki nylon – 166 oz/in or 10.4 lbs/in – Failure mode was “PET tore”

Reference Test Methods:
180° peel – PSTC 101A, ASTM D 3330
T-peel – ASTM D 1876

STORAGE AND SHELF LIFE

One year when stored at 70°F, 50% R.H.

SERVICE TEMPERATURE RANGES

Adhesive is fully activated at temperatures above 300°F (162°C) with a combination of firm pressure and a few seconds of dwell. ID can be tacked in a place at temperatures less than 300°F and be activated later with additional heat, pressure and dwell. Optimum bonds can be achieved with various combinations of the three processing parameters. A degree of experimentation may be required to determine the best process for a particular application.

Recommended Minimum Application Process: 325°F (162°C) at 10 PSI for 5 – 30 sec. dwell

Important Notice: All statements, technical information and recommendations related to the Seller’s products are based on information believed to be reliable, but accuracy or completeness thereof is not guaranteed. Before utilizing the product, the user should determine the suitability of the product for its intended use. The user assumes all risk and liability whatsoever in connection with such use. Arma Products™ makes no warranties, expressed or implied, of merchantability or fitness for a particular purpose.

01-2015-A

528 W. 21st Street #2 • Tempe, AZ 85282 • Phone: 480-968-6631 • Fax: 480-966-1885

armaproducts.net

Download PDF